Werner L6200 10-ft Fiberglass Type 1A-300-lb Load Capacity Step Ladder L6210

The L6210 fiberglass 10-ft leaning ladder is ideal for the professional. With a duty rating of 300 Lbs., it features LEANSAFE™ ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles and wall studs and perform as a standard stepladder. LEANSAFE™ ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.Maximum reach height: 14-ft (assuming a 5-ft 6-in person with a 12-in vertical reach)LEANSAFE™ ladder top with non-marring rubber bumper securely leans against walls, poles, corners and wall studs, and holds tools to increase productivityDropped rear rail pivot point gets ladder closer to your workRail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning modeCurved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder modeDouble riveted slip-resistant Traction-Tred® stepsIn leaning mode, maximum standing height is 6-ft 8-in with a maximum reach height of 13-ftIn stepladder mode, maximum standing height is 7-ft 8-in with a maximum reach of 14-ftHeavy duty internal spreaders and a full set of rear horizontals spaced one per foot