TEKTON 1/4, 3/8, 1/2 Inch Drive Ratchet and Breaker Bar Set (15-Piece) SDR99901

Tekton ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. Our low-profile head is reduced in every dimension: height, width, and length to increase access. The classic non-quick-release drive tang retains sockets with a spring-actuated detent ball—push the sockets onto the ratchet and pull to remove them. This release style gives the ratchet a flat back without any protruding release lever for best clearance. The sleek handle has a finger groove with pronounced interior edges for traction and control for any hand placement. Tekton ratchets meet (and most far exceed) the industry standard for proof torque, a measure of strength verified by a single-cycle test that applies torque until the specified value is reached without failure or any permanent deformation. The included breaker bars can be used to reach and break free rusted or stuck nuts and bolts.90-Tooth Gear – Our fine-tooth ratchet requires only a 4-degree swing arcSingle, Half-Moon Pawl – Maintains 9 teeth engaged with the gear at all times, ensuring that it won’t slip or skip under stressUltra-Compact Head – We reduced the size in height, width, and lengthNon-Quick-Release – This classic release style offers a completely flat ratchet back for clearance2-pc stubby ratchets: 1/4 inch drive, 3/8 inch drive; 2-pc 1/4 inch drive ratchets: 6 in, 9 in3-pc 3/8 inch drive ratchets: 8 in, 12 in, 18 in3-pc 1/2 inch drive ratchets: 10-1/2 in, 18 in, 24 in; 1/4 inch drive x 6 inch flex head ratchet3/8 inch drive x 12 inch flex head ratchet; 1/2 inch drive x 14 inch flex head ratchet3/8 inch drive x 18 inch breaker bar; 1/2 inch drive x 24 inch breaker bar