Powermatic 31A 115-Volt 14 -Amp Belt/Disc Sander with Dust Management

Loaded with features, the 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the integral dual dust port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6 In. x 48 In. belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

Belt and disc tables are precision-ground cast iron with miter slots, for precision and rigidity 12-inch disc spins at 2375 RPM, and 6-inch x 48-inch belt turns at 2410 SFPM Multi-position belt head locks at any angle from 0 to 90 degrees (includes indexing pin for 0, 45, and 90-degree stops) Belt table tilts down to 45 degrees, and can be set for beveled and mitered angle sanding Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support Prewired motor voltage is 115V 1Ph, but can be converted to 230V