GIVIMO Electric Concrete Floor Grinder 7-in Walk-Behind 1.7-HP 1300W Grinding Machine with Vacuum Port for Surface Prep Coating Removal

Prepare concrete floors for epoxy, stain, and overlay coatings with this walk-behind 7-in electric grinder powered by a 1.7-HP 1300W motor spinning at 1720 RPM. The grinding disc accepts diamond cup wheels and PCD segments for removing paint, adhesive residue, thin-set mortar, and surface irregularities. An integrated vacuum port connects to a shop vac or HEPA dust extractor to contain airborne silica during indoor grinding. The walk-behind handle reduces operator fatigue on large floor areas compared to hand-held angle grinders. Adjustable grinding depth controls material removal rate for precision leveling before coatings are applied.

1.7-HP 1300W Motor at 1720 RPM: Drives the 7-in disc through cured concrete, thin-set mortar, and adhesive layers without bogging under load Integrated Vacuum Port: Connects to a shop vac or HEPA extractor to capture airborne silica dust during indoor concrete grinding operations Walk-Behind Ergonomic Handle: Upright operating position reduces back and wrist strain compared to hand-held grinders on large floor surfaces Floor Prep and Coating Removal: Strips paint, epoxy, carpet glue, and thin-set mortar to expose clean aggregate before applying new floor finishes Adjustable Grinding Depth: Controls material removal rate for precise leveling, skim passes, and aggressive stock removal across varying floor conditions Specification: Motor Speed: 1720r/min; Grinding Disk Diameter: 7” / 180 mm; Color: Orange; Overall Dimensions: 27.6” x 15.4” x 24.4” / 700 x 390 x 620 mm; Net Weight: 95 lbs / 43 kg; Power: 1300W; Material: Blade: Diamond, Diamond Alloy; Adjustable: Yes; Horsepower: 1.7 HP