Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16 x 23-3/4. Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches longDouble parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cutsTool-free blade clamps allow blade changes in secondsOn-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever are all located on the front upper armArm lifts so that blade can be easily threaded through the material for inside cutsArm design keeps the blade perpendicular to the work, dramatically reducing over or under cuttingOversized, cast-iron table provides excellent material support and bevels 45 degrees (left and right)Independently certified to applicable standardsIncludes DW788 scroll saw, hex wrench, and bladesCA Residents: Prop 65 Warning(s)
