Eaton 36-kA Indoor and Outdoor Surge Protective Device CHSPT2SURGE

$128.25

Out of stock

SKU: LW-1000060733 Category: LWLOWPRICE

Protect your home electronics from the damaging effects of electrical surges Whole house AC protection Protection at the home entrance can reduce surges entering the home to an acceptable level for your home electronics and appliances Surge device is rated for a type 2 installation which is after a main disconnect and must be installed using a dedicated circuit breaker, circuit breaker is sold separately It is recommended to use a 2-pole 15 ampere circuit breaker, sold separately Universally connects to any manufacturer’s loadcenter Clear, visible LED indication displaying status of the surge protector Enclosure is rated NEMA 4 Product should be connected ON the load side of the load center main service disconnect through a dedicated circuit breaker Installation Manual PDF Warranty Guide PDF

General
Color/Finish Family	Black	Manufacturer Color/Finish	Black
Type	Surge protective device

Dimensions
Depth (Inches)	7.5	Height (Inches)	2
Weight (lbs.)	0.85	Width (Inches)	5

Features
Amperage	15	Application	Residential
Coaxial Lines Protected	0	Connection Type	Next to load center mount
Enclosure Rating	NEMA 4	Grounded	No
Housing Material	Plastic	Indicator Light	Yes
Line Protection	L-N-L-G-L-L-N-G	Maximum Amperage	15
Maximum Continuous Operating Voltage	280 V	Nominal Discharge Current	5kA
Number of Leads	4	Package Quantity	1
Rating in Joules	1890	Response Time (Microseconds)	0
Short Circuit Current Rating	22 kA	SPD Type	Type 2
Surge Current Protection Per Phase	36-kA	Surge Protection	UL
Use Location	Indoor and outdoor	Voltage Protection Rating L-G	600-V
Voltage Protection Rating L-L	1000-V	Voltage Protection Rating L-N	600-V
Voltage Protection Rating N-G	900-V	Water Resistant	No
Wattage	0	Weather Resistant	No
Wire Gauge	12-AWG