Spyder Carbide-tipped Arbored Hole Saw Kit Set (18-Piece) with Hard Case 600938

Spyder’s Tungsten Carbide-Tipped (TCT) hole saws cut more materials up to 5x faster and make up to 10x more cuts — lasting longer than conventional bi-metal hole saws. TCT hole saws drill through wood, MDF, fiber cement board, porous concrete block, ceramic wall tile, plastic/PVS and more. Use with Spyder’s Rapid Core Eject arbor system to remove cores without prying (drill hole, press button, pull back the hole saw, and eject the core), cut at an angle, and enlarge existing holes using two adapters on one pilot bit . All TCT, Tarantula, and Bi-Metal hole saws fit on Spyder Rapid Core Eject arbors and pilot bits (sold separately), and on universal hole saw arbors. Spyder’s TCT hole saw is the pro’s choice for innovation, high performance, speed, and versatility — drill more holes in more materials in less time. Not for use in hammer mode, or for drilling metal, wood with nails, harder, abrasive materials, or block/brick/tile applications with a Mohs hardness of 6 or greater. Always use a drill with a support handle. 18-piece kit contains (12) hole saws: 3/4, 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2, 2-5/8, 3, 3-5/8, 4-1/8, 4-1/2; (4) pilot bits: Hex10 TCT, Hex10 HSS, Hex8 TCT, Hex8 HSS; and (2) arbors: Hex8 and Hex10, in a hard storage case.Up to 10x more cuts and 5x faster than standard bi-metal hole sawsSpyder’s Rapid Core Eject arbor system ejects cores without prying, quickly changes diameter, cuts at an angle, and enlarges existing holesDrill wood, MDF, plywood, fiber cement board, porous concrete block, some brick, ceramic wall tile, plastic, PVC and moreTungsten carbide tipped for extended life, clean cuts and extreme material drilling versatilityMaximum cut depth of 2-3/8-inUniversal 1/2-20 thread uses Spyder Hex8 arbor/pilot bits and universal 5/8-18 thread uses Spyder Hex10 arbor/pilot bits or other universal hole saw arborsNot for use in hammer mode or for drilling metal, wood with nails, or in block/brick/tile applications with a Mohs hardness of 6 or greater18-piece kit contains (12) hole saws: 3/4, 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2, 2-5/8, 3, 3-5/8, 4-1/8, 4-1/2; (4) pilot bits: Hex10 TCT, Hex10 HSS, Hex8 TCT, Hex8 HSS; and (2) arbors: Hex8 and Hex10 — in a hard storage caseCA Residents: Prop 65 Warning(s)