WEN 5-Amp Variable-Speed Bench Drill Press 4212T

Remember when power tools were actually powerful. The WEN 10-Inch Variable Speed Drill Press powers through metal, wood, plastic and more, with the ability to drill up to a 1/2-inch hole through heavy-duty, 1-inch-thick cast iron. The mechanical variable speed allows you to dial in the exact RPM (from 530 to 3100) for your project with the simple turn of a lever while the digital LED readout displays the current speed. The powerful induction motor features ball bearings for an extended life and balanced performance. The 1/2-inch chuck with JT33 spindle taper gives you versatility with a variety of bits, with on-board chuck key storage for easy organization. The 8 by 7.5-inch cast-iron worktable bevels 45 degrees left and right for those tricky operations. The X-pattern laser shows your drill’s center points, saving on guesswork and sparing expensive materials. The 8 by 12.5-inch cast iron base features predrilled holes for easy mounting to the benchtop or work surface of your choice. And because it’s a WEN product, your drill press comes backed by a two-year warranty, a friendly customer support line, and a stocked inventory of replacement parts. Remember when you could drill with laser precision. Remember WEN.Features a 5 Amp induction motor, a 10 inch swing and a 2 inch spindle travelAdjust the mechanical variable speed anywhere from 530 to 3100 RPMDigital speed readout displays current RPM of the machine for maximum precisionIncludes a laser, adjustable depth stop, beveling 8 inch x 7.5 inch work table, 1/2 inch capacity keyed chuck, a chuck key with onboard storage and a 2-year warrantyMeasures in at 13 by 19 by 34 inches in size with a weight of 57 poundsCA Residents: Prop 65 Warning(s)