WEN 16-in 1.2-Amp Variable Corded Scroll Saw 3921

Remember when your scroll saw could cut in 2 different directions. Take on the most intricate and artful cuts with the WEN 16 in. Variable Speed 2-Direction Scroll Saw. The 9/16 in. stroke saws through hard woods up to 2 in. T. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16 in. x 10 in. table bevels up to 45 for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2 in. dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. for pinned blades, simply pop the pins out of the front holder and turn the blade 90. Now, your cuts are no longer confined by the 16 in. throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs.Unique design accepts blades in 2 directions (standard and 90) to allow for infinite ripping capacityVariable speed goes from 400 to 1600 strokes per minuteSpacious 16-by-10-inch table bevels up to 45 degrees to the left for angled cutsCuts wood up to 2 in. T with a 16 in. throat depth in the standard positionFeatures a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three bladesCA Residents: Prop 65 Warning(s)