Tekton Flare Nut Crowfoot Wrench sizes scale optimally with fitting depths to achieve the best possible combination of engagement, access, and strength. Our design is leaner than conventional 6-point crowfoot wrenches, giving you more room to work in tight spaces. The wrenches are abrasive blasted to create a smooth, satin finish. Our electroless nickel plating process applies a uniform, corrosion resistant coating to the entire tool surface. Each crowfoot wrench has a permanent high-contrast size marking engraved on the side. The wrenches are made entirely in the USA with USA-sourced materials. Most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton’s manufacturing facility in Grand Rapids, Michigan.Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slippingReinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access anglesElectroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome platingUniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the toolManufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton’s manufacturing facility in Grand Rapids, Michigan14-pc 3/8 in drive flare nut crowfoot wrenches: 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16 inch
TEKTON 14-Piece Set 6-point (Sae) Flare Nut Open End Wrench WCF90121
$111.75
Description
Related products
Bosch Digital Angle Finder and Inclinometer GAM 270 MFL
$261.75
Campbell Hausfeld 6-Gallon Portable Electric 125 PSI Pancake Air Compressor DC060500
$213.75
CRAFTSMAN 3-Gallon Portable Electric 155 PSI Hot Dog Air Compressor CM-0200341
$134.25
DEWALT 20-volt Max Grease Gun (Battery Included) DCGG571M1
$179.25
Johnson Level 800-ft Red Self-Leveling Rotary Laser Level 40-6515
$228.75
Paslode IM250S-LI2 2.5-in Cordless Finish Nailer (Battery & Charger Included) 916500
$276.75
Paslode tetraGRIP 2.375-in Pneumatic Flooring Nailer (Bare Tool Only) 503000
$299.25
U-Sand Cherryhill FL Vacuum Bag Assembly – Durable Kevlar Blend Material – On-board Collection Bag for U-Sand Floor Sanders – Flame Retardant – Perfect Fit US-VBAS14
$216.75