Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you’d like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler! The most common setup for the Precision Trak and Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak and Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method. Designed to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade. The Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning. Build a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 2-1/4″ (57mm) above the saw table for the stops to glide upon. Instructions and mounting hardware for the Trak are included. Incredibly strong and built-to-last, our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3/4″ (19mm) thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2′ (610mm) long sections, giving you setup options: 4′ (1219mm) on each side of the saw, 2′ (610mm) on one side and 6’ (1829mm) on the other, or all 8′ (2438mm) on one side.Kreg Precision Trak & Stop Kit turns your miter saw into a precise cutting systemAdjustable stops position your workpiece for repeatable, reliable resultsPrecision Lens Cursor for fast, accurate positioningL-shaped base design makes alignment and mounting easy(1) 12 ft R-L reading self-adhesive tapeIncludes 8 feet (2438mm) of Trak in 2 foot (610mm) long sections that can be used on the right or left side of the saw, or split between both sides2 self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade
Kreg Precision Track and Stop System Kit – Turn Your Miter Saw into a Precise Cutting System – Adjustable Stops – Precision Lens Cursor KMS8000
$104.25
Description
Related products
Bucket Boss HV ProTech Grey,Black Polyester 14-in Zippered Backpack 65180-HV
$121.50
CRAFTSMAN 3-Gallon Portable Electric 155 PSI Hot Dog Air Compressor CM-0200341
$134.25
DEWALT 20-volt Max Grease Gun (Battery Included) DCGG571M1
$179.25
Kobalt XTR 2.5-in 16-Gauge Cordless Finish Nailer (Battery & Charger Included) KXNA 2124A-03
$149.25
Montezuma Triangle 15.35-in W x 13.19-in H x 10.04-in D Black Steel Tool Box SB150B-2
$109.50
ToolPro 5 ft. Aluminum Flat-Top Sawhorse TP20325
$173.25
U-Sand Cherryhill FL Vacuum Bag Assembly – Durable Kevlar Blend Material – On-board Collection Bag for U-Sand Floor Sanders – Flame Retardant – Perfect Fit US-VBAS14
$216.75
Wilton 5-in Bench Vise, Gray, Replaceable Serrated Jaws, 360 Swivel Base, Double Lock Down 63301
$163.50