Kreg Hard-Anodized Aluminum Router Insert Plate for Precise Above-Table Setup Changes PRS5000

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups! The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3/8″ x 9-1/4″ x 11-3/4″ plate fits all Kreg® router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table. With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well. Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1/16″, though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts. Whether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory.Allows precise above-the-table setup changes for table-mounted routersAbove-table collet access allows fast, easy, above-table bit changes3/8 Inch x 9.25 Inch x 11.75 Inch(9.5 mm x 235mm x 298mm) hard-anodized aluminum plate won’t sag, resists scratchesFits all Kreg® router tables and many competitive brandsBearing-guided carriage provides smooth operationPrecision indexing ring with micro-adjust scale simplifies bit height changesPrecise adjustment without backlash ensures accuracyAccepts 20+ popular routers without requiring pads or adaptersCA Residents: Prop 65 Warning(s)